Site Map | Contact us | Help
Site Map | Contact us | Help
Flange Linear Bearing Series ------- LMH…UU (Resin retainer)
This type is a metrc dmenson seres generaly used in Asia and other countries.
.jpg)
.jpg)
.jpg)
| 公称轴径 Nominal shaft dia. mm |
椭圆法兰 LMH…UU |
重量 Weight (gf) |
主要尺寸和公差 Major dimensions and tolerance |
偏心Eccentricity μ m |
垂直度Squareness μ m |
额定负荷 Basic load rating |
||||||||||||||
| mm | dr | mm | D | mm | L | 法兰Flange | 动负荷 Dynamic C N |
静负荷 Static Co N |
||||||||||||
| 公差Tolerance μ m | 公差Tolerance μ m |
公差Tolerance μ m | Df mm |
W mm |
t mm |
A mm |
F mm |
X mm |
Y mm |
z mm |
||||||||||
| 6 | LMH6UU | 21 | 6 | 0 ﹣9 |
12 | 0 ﹣11 |
19 | ±300 | 28 | 18 | 5 | 20 | – | 3.5 | 6 | 3.1 | 12 | 12 | 206 | 265 |
| 8 | LMH8UU | 33 | 8 | 15 | 24 | 32 | 21 | 5 | 24 | – | 3.5 | 6 | 3.1 | 274 | 392 | |||||
| 10 | LMH10UU | 64 | 10 | 19 | 0 ﹣13 |
29 | 40 | 25 | 6 | 29 | – | 4.5 | 7.5 | 4.1 | 372 | 549 | ||||
| 12 | LMH12UU | 68 | 12 | 21 | 30 | 0 ﹣200 |
42 | 27 | 6 | 32 | – | 4.5 | 7.5 | 4.1 | 510 | 784 | ||||
| 13 | LMH13UU | 81 | 13 | 23 | 32 | 43 | 29 | 6 | 33 | – | 4.5 | 7.5 | 4.1 | 510 | 784 | |||||
| 16 | LMH16UU | 112 | 16 | 28 | 37 | 48 | 34 | 6 | 31 | 22 | 4.5 | 7.5 | 4.1 | 774 | 1,180 | |||||
| 20 | LMH20UU | 167 | 20 | 0 ﹣10 |
32 | 0 ﹣16 |
42 | 54 | 38 | 8 | 36 | 24 | 5.5 | 9 | 5.1 | 15 | 15 | 882 | 1,370 | |
| 25 | LMH25UU | 325 | 25 | 40 | 59 | 0 ﹣300 |
62 | 46 | 8 | 40 | 32 | 5.5 | 9 | 5.1 | 980 | 1,570 | ||||
| 30 | LMH30UU | 388 | 30 | 45 | 64 | 74 | 51 | 10 | 49 | 35 | 6.6 | 11 | 6.1 | 1,570 | 2,740 | |||||
Other products
Copyright © 2009 Ningbo Meiyate Precision Transfers Component Co.,Ltd Power By:AC55
